More from this category
Lithosplit-4 Classic
Intra Corporeal Pneumatic Lithotripsy System |
 |
Salient Features :
No thermal injury to tissue.
Runs on any of the sources, Oxygen Cylinder, Central Oxygen Supply or Compressed Air.
Easy to assemble and operate.
Frequencies of Impacts.
Power adjustment.
Light-weight LITHOSPLIT Super Hand Piece.
Hand Piece parts having finish better than 10RA.
Long Lasting Probes.
Demonstration Video CD.
Ultra High Speed Microprocessor.
Unique Foot Switch Fault Detection system.
Full Digital System.
Extra Power for superfast disintegration.
Feather Touch Keys.
Fuzzy Logic for Improved Energy Control.
Portable, Light Weight system.
Free Carrying Case.
Technical specifications
For Lithosplit- 4 classic
| Supply Voltage: | 230V AC @50/60Hz (110V optional) |
| Power: | 25 Watts max. |
| Frequencies of Impacts : | Four choices, Single / Multiple |
| Input Pressure : | 3.5 bar |
| Output Pressure max : | 5 bar |
| Pressure Regulator : | Continuously Variable from 0 to 4 bar |
| Input Gas : | Oxygen, Air |
| Dimensions : | 280 W X 90 H X 240 D mm |
| Weight : | 3.5 kg. |
| Carrying Case : | Provided Free of Cost |
Carry Case is Supplied As A Standard Accessory
For Lithosplit Super Hand Piece
| Input Pressure : | Controlled by the Control Unit |
| Dimensions : | 220 L X 26 Dia. mm (w/o Probe) |
| Weight : | 140 gms (w/o Probe) |
Standard Configuration
| Lithosplit-4 Control Unit | 1 no |
| LITHOSPLIT Super Hand Piece with tube and Probe Cover for 2.0 mm Probe | 1 set |
| Probe Cover for 1.0 mm Probe | 1 no. |
| Sterilisation Cover | 1 no. |
| Probe 1.0 mm | 1 no. |
| Probe 2.0 mm | 1 no. |
| Foot Switch with cable and connector * | 1 no. |
| Regulator for Oxygen Cylinder with tube | 1 no. |
| Spanner for fitting a Regulator on a cylinder | 1 no. |
| Key for operating a Cylinder | 1 no. |
| Spare “O” Ring | 2 no. |
| Spare Silicone Spring | 2 no. |
| Operations Manual with Demo Video CD | 1 no. |
| Case to store and carry the system | 1 no. |
Do we need the accessories? The standard configuration is sufficient to start. Two Probes are included in the standard configuration. Bridge for bladder stones, Adapter for Ureteroscope and Suction Assembly for PCNL are optional.
The packing details for Lithospilt 4.1 classic:
- Type of packing: Corrugated Paper carton
- Dimensions : 71X53X26 cms.
- Gross weight:11.5kg
- Net weight.:10kg.
Disclaimer :
Because of the continuous development programme the specifications may change without prior notice.
The accessories shown in the picture are not a part of the standard system.
Current and continuous development may make this publication / site lag actual equipment and accessory shipments. Consult our Head Office or Authorised distributor.