digiFLOW-ST2

The digiFLOW-ST2 is a compact and Hi-Tech digital Uroflowmetry system designed for practical, everyday flow studies. The device works with any standard PC. The investigation starts automatically when the patient starts voiding. The flow and volume scales can be adjusted.Patients' data is stored on a hard disk along with the test results and can be retrieved any time for inspection or printing out.

Advanced stand alone Uroflowmetry System

CEN

The printer provides you with a simple, crisp and clear printout with Uroflowmetry results and patient information. It also prints the clinic/hospital name on top of the sheet. Graphical flow rate charts are supported by alphanumeric data.

Salient Features :

  • Fully Automatic.

  • User Friendly completely stand-alone system..

  • Prints crisp and clear report on a thermal paper.

  • Multiple tests can be conducted successively without emptying the jar every time.

For digiFLOW ST2 Sensor

  • Auto / Manual Start & Auto Stop

  • Maintenance free.

  • Printout contains Graph and tabular text data.

  • Flow Measurement Range : 0~50 ml/sec.

  • Volume Measurement Range : 0~750 ml.

  • Removes artefacts automatically.

  • Reusable urine container and funnel.

  • High precision sensor for flow and volume.

  • Micturition chair (optional).

  • Upgradation to Urodynamics possible.

  • digiFLOW ST2 is a Fully Digital Stand-alone UROFLOMETRY system. The most striking features of digiFLOW ST2 are its effectiveness, simplicity and accuracy.

  • The AUTO mode if selected, the system waits till initial voiding to start the recording. As soon as a patient voids, the system starts recording from the first drop.

  • The inbuilt memory retains the data of the last recorded test.

  • In-built Hi-Tec calibration system. The sensor can be calibrated easily within no time to get accurate results.

  • You can have as much print outs (copies) as you wish.

  • The system has an Elegant, easy to understand Key Board for selecting all functions.

For digiFLOW ST2 Report

  • The system uses High Accuracy Weight Transducer, which requires no maintenance.

  • There is no need to empty the jar after each test is conducted. The Jar Full Indicator glows and indicates if the jar is full. This feature gives a comfort to the operator particularly during the camps.

  • n-built compact High Quality High Resolution Thermal Printer makes it easy to have crisp and clear quick printouts.

  • The printer needs No Maintenance, No Ink Refilling, No Expensive Cartridge Replacement

Technical Specifications

Control Unit Based on Ultra High Speed Micro Processor
Supply Voltage: 230 V ±10% AC @ 50-60 Hz
Power: 20 Watts (max).

Power entry:

Panel mounting IEC C14 inlet for three wire detachable cable.
Fuse: 750mA, 5X20mm, Fast Blow
Degree of protection: IP20
Dimensions: 265W X 112H X 235D mm
Weight: 2.8 Kg
Memory type: Volatile
Memory capacity: One test (Last conducted test till the unit is powered)
Flow Range: 0~50ml/sec.
Volume Range: 0~750ml
Test duration: 120sec.
LED Indications: Auto/Start, Voiding, Urine present, Jar full, Printing.
Jar capacity : 2000ml, Use only supplied plastic jar.
Key Board: Feather touch, sealed .
Cabinet shoes: Retractable for better viewing.
Sensor cable length: 4.5mtr.
Sensor Unit
Dimensions: 200W X 100H X 200D mm.
Weight: 2.8Kg.
Sensor type: Load cell.
Printer
Printing method: Direct Thermal Printing.
Resolution: 203 DPI.
Paper Loading: Easy Clam Shell type.
Sensor: Paper out detection and indication.
Cutter: Manual.
Paper : digiFLOW ST2 Premium printer paper.
Report
Printing time (one copy): 30 seconds (approx.).
Graphical data: Flow in ml/sec., Volume in ml.
Tabular data: Volume Voided, Peak flow, Voiding time, Flow time, Delay, Time to peak, Intervals and Average flow rate.
Number of copies: Single or multiple (as many as needed before starting the next test or switching off the system).
Customised letterhead : Optional.

Disclaimer :

  • Because of the continuous development programme the specifications may change without prior notice.

  • The accessories shown in the picture are not a part of the standard system.

  • Current and continuous development may make this publication / site lag actual equipment and accessory shipments. Consult our Head Office or Authorised distributor.